You can find information about the P0175 fault code on this page.
It is one of the most popular fault codes that people search for on this website (in the top 50).
We have given it a seriousness of 5/10 with 1 being the least serious and 10 being the worst.
Looking To Fix This Yourself?
By using a workshop/repair manual you could diagnose and even fix this issue yourself.
You can find a collection of free manuals containing loads of information specific to your car on our partner site.View Workshop/Repair/Service Manuals »
Fault code P0175 means that the engine control module (ECM) has detected that the second bank of the engine is running too rich.
Running rich is a term used to describe when there is too much fuel or too little air in the air-fuel mixture at any given time. The ideal air-fuel ratio is 14.7 parts of air to 1 part of fuel.
If the powertrain control module (PCM) fails to revert the air-fuel mixture back to the desired levels through the manipulation of fuel injectors and intake valves, this code will be logged.
Conversely, P0174 will be logged if bank 2 is running lean. This represents the engine is running with too little fuel.
This error also informs which side of the engine is suffering the issue. In this case, the second bank is at fault. This is the side opposite the number one cylinder.
Other Signs of This Problem
The signs of an engine running too rich are more subtle than those demonstrated with an engine that is running lean. However, they can be noticed depending on how rich the mixture is.
The first and most noticeable is the presence of the Check Engine light.
Another symptom that can be easily noticed in a severely rich engine is the presence of black smoke from the exhaust. This occurs as a result of unburnt fuel leaving the exhaust system.
Another telltale sign is noticeably higher fuel consumption.
If your vehicle is demonstrating these symptoms without the presence of the P0175 code, look for the mirror code P0172. This represents the same issue but in bank 1 of the engine.
What Could Be The Problem?
The main causes of an engine running too rich are the fuel, heat, and air systems. However, the fuel system is of particular concern.
A dirty or faulty mass airflow (MAF) sensor could be feeding the PCM incorrect readings. This would result in an overcompensation from the fuel injectors. This could also come from a faulty oxygen sensor.
Damaged or faulty fuel injectors can also cause this issue as they deliver excessive fuel. A fault fuel regulator would do the same.
Other mechanical issues like a vacuum leak or worn spark plugs could also play a role.
The fixes for this type of issue are relatively straightforward. The systems that provide head, fuel, and air all need to be checked for issues.
The MAF and oxygen sensors can easily be cleaned or replaced if they are damaged or faulty. Cleaning or replacing any fouled spark plugs can also assist in the issue.
If there is any issue with the fuel injector in question, it must be replaced or sent to an expert for repairs. The fuel pump and fuel regulators should be checked as well and replaced if faulty.
Fault code P0175 can be considered a low to moderate concern. It does not represent as much risk of damage to the engine as running too lean.
It should be fixed within a few weeks ideally.
However, the vehicle will likely suffer significantly increased fuel economy, as well as potentially pollute the environment through black exhaust smoke.
Popular Fault Codes
These are the most popular fault codes that people are searching for.
Intake Camshaft Position Actuator Circuit / Open (Bank 1)Read about code...
Intake Camshaft Position Timing - Over-Advanced (Bank 1)Read about code...
Intake Camshaft Position Timing - Over-Retarded (Bank 1)Read about code...
Exhaust Camshaft Position Actuator Circuit / Open (Bank 1)Read about code...
Exhaust Camshaft Position Timing - Over-Advanced (Bank 1)Read about code...
Crankshaft Position Camshaft Position Correlation Bank 1 Sensor ARead about code...